Product Model:

CA6161 Horizontal Lathe Machine

Product Main Technical Parameters

Horizontal Lathe Machine Main Performance Characteristics

1 Machine tool bed box, headstock and tailstock, pallet etc. the binding surface between the manual scraping machine, after rigorous testing, the precision and stability of the effective guarantee machine.

2 The machine adopts high strength cast iron, copper and chromium added special materials, bed width 400mm, bed rail quenching depth 4mm, effectively improve the wear resistance and stability of machine tool.

3 Machine tool bed box lubricated system by the use of the lubrication of the pump for lubrication, for the hot weather, to ensure the cleanliness of the bed box and heat dissipation characteristics, effectively extend the bearing and gear life.

4 Machine tool spindle using Wafangdian bearing, spindle hole diameter 52mm, the precision grinding machine tool gear, effectively improve the hardness, reduce machine noise.

5 Machine tool uses the domestic brand screw, wire mother uses the high quality bronze alloy to guarantee the wear resistance and the accuracy retention.

6 Machine tool with four position high strength tool, shank size: 25x25mm.


Horizontal Lathe Machine Application

1 CA series of ordinary horizontal lathe is suitable for turning inside and outside cylindrical surface, conical surface and other rotating surface, turning various metric and inch, modulus and pitch thread, and can carry out the work of drilling and pulling oil groove, is a very versatile horizontal lathe, widely used in all kinds of shaft and disc parts of the batch processing.

2 This series of lathe bed width in general lathe, rail width 400mm has a high stiffness; guide rail surface is quenched by medium frequency, and is durable.

3 The machine operation is flexible and concentrated, the apron with fast moving mechanism. Using single handle vivid of the operation, pleasant and good.

4 Machine tool structure rigidity and transmission rigidity are higher than the general lathe, the power utilization ratio is high, is suitable for the strong cutting.

5 Machine tool factory in strict accordance with the test procedures for testing, and make a strong cutting test, to ensure that the machine has a good accuracy and reliability. 


Horizontal Lathe Machine Main Technical Specifications:

Specifications

CA6161 CA6161B CA6161C

Max. Swing over bed

610mm

Max. Swing over carriage

370mm

Max. swing in gap

--

830mm

Effective gap length

--

210mm

Max. length of work piece

750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm

Width of bed

400mm

Section of turning tool

25x25mm

Spindle

Spindle speeds

10-1400rpm/16-1400rpm24steps

Hole through spindle

52mm. 80mm. [105mm]

Spindle taper

NO.6MT6)(Φ90 120[Φ113 120]

Feed

Number of feeds

64 kindsfor each

Range of metric threadskinds

1-192mm44 kinds

Range of inch threadskinds

2-24tpi21 kinds

Range of module threadskinds

0.25-48 (Moduie39kinds)

Range of  pitch threadskinds

1-96DP37kinds

Tailstock

Max. tail stock spindle travel

150mm

Tail stock spindle diameter

75mm

Taper of tail stock spindle center hole

NO.5(MT5)

Main motor

7.5KW(10HP)

Packing dimensions (L*W*Hmm)

Overall dimensions for750mm

2550x1140x1750

Overall dimensions for1000mm

2700x1140x1750

Overall dimensions for1500mm

3200x1140x1750

Overall dimensions for2000mm

3700x1140x1750

Overall dimensions for2200mm

4030x1140x1750

Overall dimensions for3000mm

4850x1140x1750

Overall dimensions for4000mm

5800x1140x1750

Weight (kg)

Length

G.W  N.W.

Weight for 750mm

2300  2180

Weight for 1000mm

2380  2250

Weight for 1500mm

2577  2437

Weight for 2000mm

2940  2787

Weight for 2200mm

3120  2970

Weight for 3000mm

3600  3450

Weight for 4000mm

3950  3800