GSK supplies hydraulic press machines for metal forming, straightening, assembly, pressing, bending, drawing, punching and workshop maintenance applications. The range includes YQ32 four-column hydraulic presses, HP-S manual presses, HP-M movable-cylinder presses and higher-capacity industrial hydraulic presses for different production requirements.
Instead of selecting a press only by tonnage, buyers should evaluate the required pressing force, workpiece dimensions, ram stroke, daylight opening, table size, operating mode and production cycle. GSK can help match the machine structure and capacity to the actual part and process.
Different press structures solve different manufacturing problems. The best industrial hydraulic press is not necessarily the machine with the highest tonnage, but the one whose frame, worktable, cylinder and control method match the workpiece.
Designed for production processes such as stamping, bending, flanging, drawing, correction, compression and forming of plastic or powder products.
GSK currently lists models from 63T through 630T, making the YQ32 series suitable for applications that require a guided moving beam and larger working area.
View YQ32 Four-Column Hydraulic Presses →A practical choice for maintenance workshops, repair work and low-volume operations where simple manual control is preferred.
Typical jobs include pressing and clamping as well as straightening beams, shafts and sections. GSK HP-S models cover approximately 10T to 100T.
View HP-100S Manual Hydraulic Press →The movable-cylinder design allows the hydraulic cylinder to travel across the frame so the operator can align the ram with different positions on a larger workpiece.
This structure is useful for shafts, assemblies and workpieces where the pressing point is not always located at the center of the table.
View HP-200M Movable Cylinder Press →Higher-capacity HP hydraulic presses are designed for industrial operations including assembly, dismantling, alignment, bending, punching and other high-force workshop processes.
Models can be selected according to required pressing force, worktable dimensions and ram travel.
View HP-500 Hydraulic Press →Start with the process rather than the model number. The table below provides a practical starting point for selecting a hydraulic press machine.
| Requirement | Recommended Type | Why | Typical Applications |
|---|---|---|---|
| Production forming | YQ32 Four Column | Guided pressing structure and larger working area | Drawing, forming, stamping, compression |
| Workshop maintenance | HP-S Manual | Simple operation and lower automation requirement | Bearings, bushings, shafts, straightening |
| Different pressing positions | HP-M Movable Cylinder | Cylinder can be positioned across the frame | Long parts, shafts, repair and assembly |
| High-force industrial work | HP Industrial Series | Higher pressing capacity | Assembly, dismantling, bending, punching |
The following examples show how machine capacity, stroke and working area change between different press types. Always confirm the final specification against your workpiece before ordering.
| Model | Type | Capacity | Travel / Stroke | Table / Working Area | Typical Use |
|---|---|---|---|---|---|
| YQ32-63T | Four Column | 630 kN | 400 mm | 550 × 500 mm | Small-medium forming and pressing |
| YQ32-315T | Four Column | 3150 kN | 500-700 mm | Up to 1260 × 1160 mm | Industrial forming and drawing |
| YQ32-630T | Four Column | 6300 kN | 1500 mm max. opening | 1600 × 1600 mm between working limits | Large forming and high-force production |
| HP-100S | Manual | 1000 kN | 260 + 450 mm | 400 × 600 mm | Straightening, pressing and maintenance |
| HP-200M | Movable Cylinder | 2000 kN | 300 + 405 mm | 500 × 1000 mm | Large parts and offset pressing positions |
| HP-500 | Industrial Hydraulic Press | 5000 kN | 300 + 405 mm | 900 × 1200 mm | Assembly, alignment, bending and punching |
Specifications shown are representative published configurations. Final dimensions and options should be confirmed in the technical quotation.
A hydraulic press converts fluid pressure into linear pressing force. A hydraulic pump sends pressurized oil to the cylinder, moving the piston and ram toward the workpiece. The tool, die, fixture or support beneath the ram determines how the force is applied.
One of the main advantages of hydraulic pressing is the ability to control pressing force and ram movement for different forming, assembly and straightening operations.
Stamping, drawing, flanging and compression forming of metal components using suitable dies and tooling.
Correction of bent shafts, beams, bars, profiles and other distorted metal workpieces.
Installation and removal of bearings, bushings, sleeves, pins and interference-fit components.
Controlled pressing force for industrial assembly, maintenance and equipment rebuilding operations.
Selected HP-series machines can support bending and punching processes with appropriate tooling.
Four-column hydraulic presses can be used for compression of suitable plastic and powder-based products.
A four-column hydraulic press machine is usually more appropriate when the application requires a guided moving platen, larger working area and repeatable vertical pressing movement.
GSK YQ32 presses are particularly relevant to forming processes such as stamping, bending, flanging, drawing, correction and compression.
| Factor | Manual Hydraulic Press | Powered Industrial Hydraulic Press |
|---|---|---|
| Best use | Maintenance and occasional pressing | Frequent or higher-force production work |
| Operation | Manual hydraulic control | Powered hydraulic system |
| Production frequency | Low to moderate | Moderate to continuous |
| Typical work | Bearings, shafts, repair | Forming, assembly, bending, production pressing |
A conventional fixed-cylinder press requires the workpiece to be positioned beneath the ram. For long, heavy or irregular components, moving the workpiece repeatedly may be inconvenient.
On the GSK HP-M series, the hydraulic cylinder can move along the press frame. This expands the practical working area and allows the ram to be aligned with different pressing points.
A movable cylinder hydraulic press can therefore be useful for long shafts, structural parts, repair work, assembly and other applications where the force needs to be applied at several positions.
Pressing force: Select tonnage according to the maximum force required by the most demanding operation, with an appropriate process margin.
Ram stroke: The cylinder must provide enough travel for tooling, workpiece loading and the actual pressing process.
Maximum opening: Confirm that the workpiece, fixture and tooling can fit between the ram and working table.
Table size: Check the complete fixture footprint, not only the finished workpiece dimensions.
Frame type: Four-column, manual workshop and movable-cylinder presses serve different accessibility and production requirements.
Operating speed: High-volume production may require faster approach, pressing and return speeds than workshop maintenance.
Control requirement: Define whether you need simple manual operation, powered control, adjustable pressure/stroke or a customized production sequence.
Two customers may both request a 200-ton hydraulic press but require completely different machines.
Standard tonnage is only the starting point. GSK supports OEM and ODM projects and can evaluate the machine according to your workpiece, tooling and production process.
Safety configuration should be defined according to machine type, local regulations and the intended production process. For industrial projects, discuss the following items during technical confirmation:
Emergency-stop arrangement
Pressure protection and hydraulic overload control
Operator guarding requirement
Two-hand or alternative operating control where applicable
Stroke and pressure adjustment
Electrical voltage and local electrical standard
Required certification documentation
Final safety equipment and certification scope should be confirmed in the machine quotation for the destination country.
For international machine-tool buyers, machine specification is only one part of supplier evaluation. Manufacturing experience, quality inspection, customization capability and export support are also important.
GSK supports OEM and ODM projects. For hydraulic press projects, buyers can provide workpiece dimensions, required force, tooling size, process description and production quantity for technical evaluation.
GSK lists ISO, CE, BV, TUV, SGS, EAC and other certification capabilities. The exact certificate applicable to a specific machine and destination market should be confirmed before order.
GSK states an 18-month warranty policy for its machine-tool products. Detailed warranty scope, spare-parts terms and service conditions should be confirmed in the commercial quotation.
Learn more about GSK manufacturing and quality capabilities .
Providing the information below helps GSK recommend the correct press instead of quoting only by tonnage.
The required force depends on the material, workpiece dimensions and process. Select capacity according to the highest-force operation rather than choosing a machine only from the most common job.
Four-column presses are commonly selected for forming and production processes that benefit from guided platen movement and larger tooling areas. Workshop presses are generally simpler and are often used for straightening, assembly and maintenance.
A movable-cylinder design is useful when the workpiece is long or difficult to reposition and the pressing point changes across the working area.
Depending on machine type and tooling, typical applications include forming, drawing, bending, straightening, press fitting, assembly, dismantling, punching and compression.
No. Machines with the same nominal force can have very different table sizes, strokes, openings, frame designs and control systems. These specifications must match the actual workpiece.
GSK supports OEM and ODM projects. Provide your workpiece drawing, process, required force, tooling dimensions and production quantity for technical evaluation.
Check ram stroke, maximum opening, worktable size, frame structure, working pressure, pressing speed, return speed, tooling clearance and control method.
GSK states an 18-month warranty policy. Confirm the exact coverage, spare parts and service conditions in the final quotation.
Do not select a press from tonnage alone. Send GSK your part drawing, pressing process, material, required force, tooling size and production volume. We can help compare four-column, manual, movable-cylinder and industrial hydraulic press configurations.
Recommended RFQ information: workpiece drawing + process + force + stroke + tooling + quantity.
Request a Hydraulic Press SolutionView More
Navigation
Tel.: +86 632 5083 879
Mob.: +86 151 6326 5369
Wechat: +86 151 6326 5369
E-mail: info@gskequipment.com
WhatsApp: +86 151 6326 5369
