Product Model:

BK5018 CNC Slotting Machine

Product Main Technical Parameters

CNC Slotting Machine Main Performance Characteristics:

1. The working table of the machine tool is provided with three different directions of feed (longitudinal, horizontal and rotary), therefore work object go through once clamping, Several surfaces in the machine tool machining,

2. Hydraulic transmission mechanism with sliding pillow reciprocating motion and hydraulic feed device for working table.

3. The sliding pillow has the same speed in every stroke, and the movement speed of the ram and the working table can be adjusted continuously.

4. Hydraulic control table have ram commutation oil for oil reversing mechanism, In addition to hydraulic and manual feed outer, Even there single motor drive vertical, horizontal and rotary fast moving.

5. Use hydraulic feed the slotting machine, Is when the work is over  turning back instantaneous feed, Therefore be better than mechanical slotting machine used drum wheel feed.

CNC Slotting Machine Application:

This machine be used for interpolation plane, forming surface and Keyway Etc. And can insert the inclination in the 10° Mold and other  within the scope of etc. work matter,,

Enterprise suitable for single or small batch production.

CNC Slotting Machine Main Technical Parameters:

Ram maximum slotting lengthmm180
Ram stroke adjustmentmm80
Ram per minute motion dataN/min46/60/90
Work table sizemm600X320
Table travel (X,Y)mm460X320
The knife head supporting hole axis to distance  of upright column for armmm400
The knife head supporting hole end to table working distancemm480
X to the motor torqueN.M6
Y to the motor torqueN.M6
Fast movingX(m/min)Y(m/min)55
Ball screw X
Ball screw Y
The main motor powerK w1.5/2/2.2
Machine weightkg1500