Product Model:

B5040 Slotting Machine

Product Main Technical Parameters

Slotting Machine Main Performance Characteristics

1.The working table of the machine tool is provided with three different directions of feed (longitudinal, horizontal and rotary), therefore work object go through once clamping, Several surfaces in the machine tool machining

2.Hydraulic transmission mechanism with sliding pillow reciprocating motion and hydraulic feed device for working table.

3.The sliding pillow has the same speed in every stroke, and the movement speed of the ram and the working table can be adjusted continuously.

4.Hydraulic control table have ram commutation oil for oil reversing mechanism, In addition to hydraulic and manual feed outer, Even there single motor drive vertical, horizontal and rotary fast moving.

5.Use hydraulic feed the slotting machine, Is when the work is over  turning back instantaneous feed, Therefore be better than mechanical slotting machine used drum wheel feed.

Slotting Machine Application

This machine be used for interpolation plane, forming surface and Keyway Etc. And can insert the inclination in the 10° Mold and other  within the scope of etc. work matter,,

Enterprise suitable for single or small batch production.

Slotting Machine Main Technical Parameters:

Max. slotting lengthmm400
Max.weight of workpiecekg500
Max.cutting forceN7500
No.of ram strokes per minute
Ram vertical adjustment distancemm315
Ram tilt angle°0-8
Max.tool shank size(W*H)mm25x40
Table Diametermm630
Distance between tool holding and column frontmm600
Distance between table surface and low end of rammm690
Max. longitudinal travel of tablemm620
Max. cross travel of tablemm560
Table motorized feed rangemm0.08-1.21
Motor powerkw4
Motor speedrpm960
Overall dimension(L*W*H)mm2290*1525*2485
Machine weightkg3700