Product Model:

B5032 Slotting Machine

Product Main Technical Parameters

Slotting Machine Main Performance Characteristics:

1.The working table of the machine tool is provided with three different directions of feed (longitudinal, horizontal and rotary), therefore work object go through once clamping, Several surfaces in the machine tool machining

2.Hydraulic transmission mechanism with sliding pillow reciprocating motion and hydraulic feed device for working table.

3.The sliding pillow has the same speed in every stroke, and the movement speed of the ram and the working table can be adjusted continuously.

4.Hydraulic control table have ram commutation oil for oil reversing mechanism, In addition to hydraulic and manual feed outer, Even there single motor drive vertical, horizontal and rotary fast moving.

5.Use hydraulic feed the slotting machine, Is when the work is over  turning back instantaneous feed, Therefore be better than mechanical slotting machine used drum wheel feed.

Slotting Machine Application:

1. This machine be used for interpolation plane, forming surface and Keyway Etc. And can insert the inclination in the 10° Mold and other  within the scope of etc. work matter,,

2. Enterprise suitable for single or small batch production.

Slotting Machine Main Technical Parameters:

Max. stroke of RAMmm340
Ram maximum slotting lengthmm320
Ram motion frequencytimes/min20.32.50.80
Ram tilt angle°0-8
Ram vertical adjustment distancemm315
Cutter head bearing surface to the distance between the forearm bedmm600
Table Diametermm630
The distance between the lower end of the sliding frame to work tablemm490
Max. longitudinal moving distance of working tablemm630
Max. transverse moving distance of working tablemm560
Table maximum rotation angle°360
Vertical and horizontal table power feed rangemm0.08-1.21
Table rotary feed rangemm0.052-0.783
 Motor powerkw4
Motor speedr/min960
Machine weightkg3000
Outline dimensionmm2261*1495*2245