The advantages of universal radial drilling machine in work

The universal radial drilling machine is a type of regular drilling machine product that is widely used and has high applicability. The universal radial drilling machine has good performance, high cost-effectiveness, and obvious advantages, and has been widely praised by customers. In summary, it can be summarized into the following detailed aspects:

Advantage One

The drilling part of the universal radial drilling machine can be flexibly adjusted: when using the universal radial drilling machine for drilling, it is not necessary to use the rocker handle specifically to make the spindle box run back and forth along the rocker guide rail. Instead, a gentle push at a specific part of the rocker arm of the universal radial drilling machine can make the spindle of the machine convenient, agile, and fast to reach the new position that needs to be adjusted, facilitating the next step of operation.

Advantage 2

A single device of the universal radial drilling machine can be used by multiple other devices and has a wide range of applications: the spindle of the machine tool can be driven and rotated by a single motor, which can adjust the lifting of the rocker arm together. The spindle rotation and rocker arm lifting of the machine tool can be carried out separately, and the spindle rotation, rocker arm lifting and spindle immediately stop. The structural design is relatively simple, easy to operate, and easy to understand.

Advantage Three

The universal radial drilling machine has a wide range of processing applications and can process various special components. In the early days when it was first created, the processing scale of the universal radial drilling machine was relatively small. It can only be used when the spindle is turned to the horizontal and the spindle box is at the outermost end of the rocker arm. Otherwise, when the rocker arm and spindle are parallel, the workpiece cannot settle within the axial movement scale of the drill bit. In this case, There is no way to process the workpiece. Nowadays, with the sophistication of product skills and the continuous improvement of scientific researchers, the new universal radial drilling machine has completely overcome the above defects. Moreover, due to the special structure of the machine tool, the rocker arm is at the outermost end of the spindle from any viewpoint, so that the interference of the rocker arm will not affect the processing of the workpiece.

Advantage Four

The appearance design is becoming more reasonable: the accessory of the universal rocker drill in the early stage - the spline shaft is necessary to use but cannot be hidden, so it is necessary to expose it. The spline shaft is exposed outside the machine tool without a protective cover, which is neither safe nor simple and disorderly. On the new drilling machine, the defect of exposed spline shaft accessories has been eliminated. After skill improvement, it has been installed in a gearbox, so that all products are safe and beautiful.

Advantage Five

The universal radial drilling machine has low cost and high cost-effectiveness, making it more suitable for the needs of customers. This is because the machine tool undergoes functional restructuring and structural optimization while completely abandoning traditional equipment design ideas and preserving the original equipment functions, reducing unnecessary components and production costs.