Pay attention to four key points when using a horizontal machining center

A horizontal machining center refers to a machining center where the workbench and spindle are set in a parallel state. A horizontal machining center usually has three linear motion coordinate axes and one workbench rotation axis. A horizontal machining center can autonomously select different cutting tools according to the program after clamping the workpiece at once, automatically change the spindle speed, and complete multiple machining processes on multiple surfaces in sequence according to the programming sequence. This type of machining center is suitable for machining box type parts. Next, the editor will introduce the four key points to pay attention to when using a horizontal machining center.

Environment for installing horizontal machining centers

The horizontal machining center should be installed away from the source, away from direct sunlight, without thermal radiation, and in a damp place. If there is a seismic source near the location where the horizontal machining center is installed, shock-absorbing grooves should be set up around the horizontal machining center. If the anti vibration groove is not set, it will directly affect the machining accuracy and stability of the horizontal machining center. Over time, it will affect the poor contact of electronic components, cause failures, and affect the reliability of the horizontal machining center.

Strict control of voltage and current

Horizontal machining centers are generally installed in the machining workshop, and the large number of mechanical equipment in the machining workshop inevitably leads to significant fluctuations in the power grid. Therefore, the installation position of the horizontal machining center must strictly control the voltage and current of the power supply. The voltage and current of the power supply must be controlled within the allowable range of the horizontal machining center, and the voltage and current of the power supply must be kept stable, otherwise it will directly affect the normal operation of the horizontal machining center.

Temperature and humidity directly affect horizontal machining centers

Horizontal machining centers generally need to operate in an environment below 30 degrees Celsius to function properly. In general, the distribution box of a horizontal machining center is equipped with exhaust fans and cold air fans to ensure that electronic components and central processing work at a constant temperature. If the temperature and humidity are too high, it will lead to a decrease in the lifespan of the control system components, resulting in an inexplicable increase in failures of horizontal machining centers. If the humidity increases, dust will accumulate on the integrated circuit board, directly leading to poor contact and short circuit faults.

Factory parameter settings for machine tools

When using a horizontal machining center, customers cannot arbitrarily change the factory parameter settings of the machine tool, as these factory parameter settings are directly related to the dynamic characteristics of each component of the horizontal machining center. Only the gap compensation parameter value can be set according to the actual situation. If you want to change the factory setting parameters, you should contact the manufacturer and operate under the guidance of the manufacturer's technical personnel to change the factory parameter settings.